Casing Hangers

Mandrell Type MC-M2-R Casing Hanger

Rotating mandrel casing hanger MC-M2-R facilitates running the casing in restricted areas and at highly deviated wells, horizontal and/or verticals and improves cement job´s quality enhancing wellbore stability.

It allows production casing to rotate while descending and during cementing operations.

The makeup / breakout of running tool is fast and simple. Additionally the breakup is automated when turning left.

Mandrell Type MC-M2-R Casing Hanger

  • Allows cement returns drill-thru ports to the surface BOP stack.

  • BPV preparation.

  • Available with frac sleeve preparation and metal to metal seal.

MC-21 Casing Hangers & Type H Seal

It is a cylindrical-profile, single-slip casing hanger, housed in either MC-22 or MCM casing heads or casing spools.

It is used together with type H seals to isolate the annulus space, regardless of the casing load on the hanger.

It cannot be used when the head has tie-down screws (MC-22P or MC-29P casing heads or casing spools) or with BX rings.

MC-22 Casing Hanger

It is a cylindrical-profile, single-slip casing hanger, housed in either MC-22, MC-29 or MCM casing heads or casing spools.

It is a wrap-around, integral slip and seal assembly that can be lowered through the preventors. The annulus seal is automatically energized by the weight of the casing.

MC-29 Casing Hanger

It is a cylindrical-profile, dual-slip casing hanger, housed in either MC-29 or MCM casing heads or casing spools.

It is a wrap-around, integral slip and seal assembly that can be lowered through the preventors. 

The annulus seal is automatically energized by the weight of the casing. It has a high load capacity and distributes the loads in order to minimize tubing deflection.

© 2020 Moto Mecánica Argentina S.A.